From: 40 Frames (email suppressed)
Date: Tue Oct 17 2006 - 05:25:39 PDT
<email suppressed>
<email suppressed>
In-Reply-To: <email suppressed>
>> Depending on your use, I'd have to concur with Jeff...get a new Eiki.
Parts are still available, >> and people are still around to service
them. If
>> you get one off eBay I recommend sending it off to be serviced, an
overhaul will run you about >> $125-150 and shipping another $100 (both
ways). So, add that to the cost of the projector.
>
>
>
> Who is recommended for servicing them ? (As I've got an SSL-0 which may
need it some day)
>
> -Sam
I've had success with Jeff K's recommendation...
Ballard Bros Electronics
1043 Adams Avenue
Montgomery, AL 36104
Rick Ballard 334-834-9238
$125 for complete overhaul plus shipping (I pay $25-30 each way from
Portland, OR).
Other recommends...
(East Coast)
Abdule Setoa in New York.
718-426-1986 or email suppressed
You might try DB Griffith in New York at (address suppressed)
Langie Audio Visual
349 West Commercial
E. Rochester NY 14445
585-385-4880
http://www.langieav.com
Sanford A/V Repair
http://www.sanfordcamerarepair.com/av.html
(West Coast)
Don Erkel at Industrial Photographic Supply in Los Angeles 805-641-3428.
KMR in Los Angeles.
Echo Park Film Center
http://www.echoparkfilmcenter.org/
Ken Fountain email suppressed
Then JD Audio Visual in Pasadena.
http://www.jdav.com/home/locations.shtml
Richard Bennett at Cinema Engineering will outsource to a technician at
$85/hr.
-Alain
================
40 FRAMES
Alain LeTourneau
Pamela Minty
425 SE 3rd, #400
Portland, OR 97214
United States
+1 503 231 6548
Skype ID: frames40
email suppressed
http://www.40frames.org
__________________________________________________________________
For info on FrameWorks, contact Pip Chodorov at <email suppressed>.