From: Sandra Maliga (email suppressed)
Date: Sun Feb 04 2007 - 18:20:15 PST
Bill Brand
(From Google)
I could have gone to my address book (he's a friend) but wanted to
get it from Google just to point out that you can find stuff and
folks there.
Sandy
On Feb 4, 2007, at 5:58 PM, amanda christie wrote:
> thanks jeff!
>
> three more questions....
>
>
>>> than 16mm and that the sprocket holes are smaller.
>>
>> The sprocket holes are the same,
>
> but in terms of size.... when i look at them... they
> seem to be the same height... and yes... twice as
> many... but the 8mm holes seem to be ever so slightly
> narrower.... (width wise, not height wise)... am i
> wrong? and if not, does this even matter?
>
>
>> up on the sprocket teeth, making the inter-tooth
>> distance (pitch)
>> greater.
>
> and speaking of pitch... i haven't had to deal with
> this much before... and i have a vague idea as to what
> it might mean... and as to what "inter-tooth distance"
> might mean... but i am not entirely sure.... could you
> please explain to me in greater detail what exactly
> "pitch" is? if you don't mind of course... it would
> be very much appreciated....
>
>
>
>
>> Stocks with 8mm perfs
>> will be special order, with large orders required.
>> Not likely to
>> happen often.
>
> can i contact print a neg on regular 16mm stock???
>
>
>> Your best and most affordable bet is to either use a
>> JK optical
>> printer and make 16mm internegs (or get Bill Brand,
>> BBOptics, to do
>> it)
>
> i've got access to optical printers.... but i just
> don't want the added grain... but since you mention
> him... who is bill brand and do you have his contact
> info? i'm always interested in finding out who's
> optically printing and where these days.
>
>
> once again,
>
> thanks so much!
>
> amanda
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> __________________________________________________________________
> For info on FrameWorks, contact Pip Chodorov at <email suppressed>.
>
__________________________________________________________________
For info on FrameWorks, contact Pip Chodorov at <email suppressed>.