From: marco poloni (email suppressed)
Date: Thu Jan 29 2009 - 06:24:16 PST
Hello Ben,
Following Steve's prophecy I sent you a couple of operation manuals in PDF format. their size exceeded the maximum allowed. If you send me your private email address I'll resend them off line.
best,
marco
-----Original Message-----
>From: Steve Polta <email suppressed>
>Sent: Jan 29, 2009 4:57 AM
>To: email suppressed
>Subject: Re: The Eiki SSL Repair Tip, Please.
>
>Hi Ben,
>
>This is just a guess, and I'm not intimate with this model, but it may be that a rubber drive belt which runs as a loop on the interior of the feed arm is loose and is binding somehow inside. Often you can use a screw driver to unscrew the screws holding this arm together to check this out.
>
>Probably someone will post in about five minutes with a schematic or pdf manual and be of more help and expose my advice as worthless, but until they do...
>
>
>--- On Wed, 1/28/09, ben russell <email suppressed> wrote:
>
>> From: ben russell <email suppressed>
>> Subject: The Eiki SSL Repair Tip, Please.
>> To: email suppressed
>> Date: Wednesday, January 28, 2009, 1:21 PM
>> Frameworkers,
>>
>> I just received an Eiki SSL-O from EBay and there's a
>> loud rubbing sound
>> coming from the feed arm when the projector is running
>> forward. I've
>> noticed the same thing on another Eiki, and was
>> wondering/hoping that some
>> of y'all might be able to pass a repair tip or two my
>> way. I did spray some
>> WD-40 on the gears but to no avail...
>>
>> Many Thanks,
>>
>> BR
>>
>> --
>> www.dimeshow.com
>> www.magiclanterncinema.com
>>
>>
>> __________________________________________________________________
>> For info on FrameWorks, contact Pip Chodorov at
>> <email suppressed>.
>
>
>
>
>
>__________________________________________________________________
>For info on FrameWorks, contact Pip Chodorov at <email suppressed>.
------------------------------------------------
Marco Poloni, Korsörer Strasse 1, D-10437 Berlin
gsm +41.78.6322028, skype marcopoloni
__________________________________________________________________
For info on FrameWorks, contact Pip Chodorov at <email suppressed>.