From: Noe Gaytan (email suppressed)
Date: Thu Jul 01 2010 - 11:55:42 PDT
Thanks for all the help!
-Noe
-----Original Message-----
From: email suppressed on behalf of Els van Riel
Sent: Thu 7/1/2010 11:51 AM
To: Experimental Film Discussion List
Subject: Re: [Frameworks] Eiki 16mm Projector
e-bay has them some time
I'm sure you will find one, if it only looks like the one on the
picture, it will be fine.
Don't forget that any projector needs lots of care, spare light
bulbs, parts, wheels, rubber belts, etc
when you rent instead of buy, all these come along...
best
Els, Brussels
On 01 Jul 2010, at 20:28, Noe Gaytan wrote:
>
> Yes I did look into them, but they are a bit pricey. The NoWHere
> looper is more affordable, I just need to make sure the projector I
> buy i compatible. I just want to make sure that any Eiki projector
> will work and where the best place to buy one would be.
>
> thanks
> -Noe
>
> -----Original Message-----
> From: email suppressed on behalf of 40 Frames
> Sent: Thu 7/1/2010 11:16 AM
> To: Experimental Film Discussion List
> Subject: Re: [Frameworks] Eiki 16mm Projector
>
> On Thu, Jul 1, 2010 at 10:10 AM, Noe Gaytan <email suppressed>
> wrote:
>
> > I am looking to buy, as renting for a 3 month period would be
> > ridiculously expensive.
> > I am located in Claremont, California, US
> > -Noe
> >
>
>
> Have you tried contacting RFS? I've seen their loopers used for
> projector
> installations at the Henry Art Gallery (Seattle).
>
> http://www.16mmdirectory.org/search?q=robert+film+services
>
>
> Alain
>
>
>
>
>
> >
> >
> >
> > -----Original Message-----
> > From: email suppressed on behalf of Pip
> Chodorov
> > Sent: Thu 7/1/2010 10:02 AM
> > To: Experimental Film Discussion List
> > Subject: Re: [Frameworks] Eiki 16mm Projector
> >
> > Elf and Eiki are similar, but the handle size may be different. The
> > NoWHere loopers screw into the top of the projector in place of the
> > handle. There should be a slot in place of a hole in order to
> account
> > for the different distances between scews on different projectors.
> > Are you looking to rent or buy one, and where are you located?
> > Pip Chodorov
> >
> >
> > At 9:57 -0700 1/07/10, Noe Gaytan wrote:
> > >Hello,
> > >
> > >I am trying to get a hold of a projector that is compatible with a
> > >loop machine from this web site:
> > ><http://www.no-w-here.org.uk/index.php?
> cat=4&subCat=docdetail&id=80>
> > http://www.no-w-here.org.uk/index.php?cat=4&subCat=docdetail&id=80
> >
> > >
> > >according to the site, the looper works best with Elf projectors,
> > >specifically NT1 and NT2.
> > >I dont know anything about projectors, but after doing some
> > >googling, i see that Elf is also known as Eiki.
> > >I couldnt find any shopping results for neither Elf NT1 nor Eiki
> NT1.
> > >
> > >Does anybody know where I can find a projector compatible with that
> > >looper, or what other names those projectors go by?
> > >
> > >Thank You,
> > >
> > >Noe G
> > >
> >
> >
> > _______________________________________________
> > FrameWorks mailing list
> > email suppressed
> > http://mailman-mail5.webfaction.com/listinfo/frameworks
> >
> >
>
>
> --
> 40 FRAMES
> Alain LeTourneau
> Pam Minty
>
> 40 FRAMES
> Attention: Pam Minty
> PO Box 15207
> Portland, OR 97293
> USA
>
> +1 503 231 6548
> 40frames.org
> 16mmdirectory.org
>
>
> _______________________________________________
> FrameWorks mailing list
> email suppressed
> http://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
email suppressed
http://mailman-mail5.webfaction.com/listinfo/frameworks