From: Nicholas Hamlyn (email suppressed)
Date: Wed Oct 03 2007 - 00:05:52 PDT
When you look inside you will see the pulleys and belt quite clearly.
Turn the inching knob at the front of the projector and slip the belt
across with one finger as you do so.
Make sure the power is off!
Nicky Hamlyn.
On 2 Oct 2007, at 23:41, Pablo de Ocampo wrote:
> I don't remember if the 2000 and the 2000-A are the same? If so, yes
> the
> 2000 can switch between 18 and 24 fps. You have to switch a belt
> internally
> from one set of pulleys to another. not to be confused with some eikis
> that
> will let you switch a belt for running the motor at 50hz or 60hz.
>
> It's a tight squeeze to get in there, but relatively easy to do.
>
>
> Pablo
>
> }- - - -- - - - - - {
>
> Pablo de Ocampo
> Artistic Director
> THE IMAGES FESTIVAL
> 448-401 Richmond Street West
> Toronto. Ontario M5V 3A8 Canada
> T 416.971.8405
> F 416.971.7412
> http://www.imagesfestival.com
>
> 21st Edition>>>> 3-12 April 2008 >>>>>>
>
>
>
> __________________________________________________________________
> For info on FrameWorks, contact Pip Chodorov at <email suppressed>.
>
__________________________________________________________________
For info on FrameWorks, contact Pip Chodorov at <email suppressed>.